- (*)M.YURDDAŞKAL,M.NİL,Y.ÖZTÜRK,E.ÇELİK,”Synergetic effect of antimony trioxide on the flame retardant and mechanical properties of polymer composites for consumer electronics applications”,Journal of Materials Science:Materials in Electronics,vol.29,pp.4557-4563,March 2018
- (*)S.GÜLTEKİN,S.YILDIRIM,E.ÇELİK,L.Z. ARICAN ALICIKUŞ,”Dielectrical,optical,and structural characterization of TiO2/pVA nanocomposite films for dielectric applications”,Journal of the Australian Ceramic Society,pp.1-9,January 2018
- (*)M.YURDDAŞKAL,E.ÇELİK,”Effect of halogen-free nanoparticles on the mechanical,structural,thermal and falme retardant properties of polymer matrix composite”,Composite Structures,vol.183,pp.381-388,January 2018
- (*)T.DİKİCİ,M.YURDDAŞKAL,S.YILDIRIM,E.ÇELİK,”Influence of growth parameters on the properties of TiO2 films prepared by anodic spark oxidation method and photocatalytic degradation of methylene blue”,Journal of the Australian Ceramic Society,pp.1-8,December 2017
- (*)C.BADAY,M.YURDDAŞKAL,M.OZGUL,M.ZOR,E.ÇELİK,”Production,characterization and optimization of thermoelectric module and investigation of doping effects on thermoelectric performances”,Journal of Materials Science:Materials in Electronics,vol.28,pp.17468-17481,December 2017
- M.YURDDAŞKAL,S.YILDIRIM,T.DİKİCİ,M.EROL,İ.ARITMAN,E.ÇELİK,”Enhanced photocatalytic properties of Sn-doped ZnO nanoparticles by flame spray pyrolysis under UV light irradiation”,Turkish Chemical Society,Section A:Chemistry,vol.5,pp.12-22,December 2017
- (*)T.DİKİCİ,M.YURDDAŞKAL,S.DEMİRCİ,E.ÇELİK,”The effects of growth conditions on the surface proerties and photocatalytic activities of anatase TiO2 films prepared via electrochemical anodizing and annealing methods”,Journal of Porous Materials,vol.24,pp.1535-1544,December 2017
- M.YURDDAŞKAL,S.YILDIRIM,T.DİKİCİ,M.EROL,İ.ARITMAN,H.D. ERTUĞRUL UYGUN,E.ÇELİK,”Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders”,Turkish Chemical Society,Section A Chemistry,vol.5,pp.9-14,December 2017
- (*)İ.ARITMAN,S.YILDIRIM,M.F.EBEOĞLUGİL,M.YURDDAŞKAL,K.ERTEKİN,E.ÇELİK,”Sol-gel Synthesis,Characterization and Photoluminescence Properties of Sub-micron Gd2O2SO4 Powders”,Journal of the Australian Ceramic Society,vol.53,pp.457-463,October 2017
- (*)Y.ARMAN,M.ÖZGÜL,E.ÇELİK,”Numerical investigation of residul stresses in high temperature ZrO2 insulation coatings on Ag tape substrate for magnet technologies”,Journal of the Australian Ceramic Society,vol.53,pp.855-861,October 2017
- (*)S.YILDIRIM,C.EREN,K.ASAL,K.ERTEKİN,E.ÇELİK,”Luminescent properties of scintillator nanophosphors produced by flame spray pyrolysis”,Journal of Luminescence,vol.187,pp.304-312,July 2017
- (*)R.DALMIŞ,H.ÇUVALCI,A.ÇANAKCI,E.ÇELİK,”The Effect of Mechanical Milling on Graphite Boron Carbide Hybrid Reinforced ZA27 Nanocomposites”,Arabian Journal for Science and Engineering,vol.43,pp.1113-1124,July 2017
- (*)M.YURDDAŞKAL,M.EROL,E.ÇELİK,”Carbon black and graphite filled conducting nanocomposite films for temperature sensor applications”,Journal of Materials Science:Materials in Electronics,vol.28.pp.9514-9518,July 2017
- (*)S.YILDIRIM,S.DEMİRCİ,K.ERTEKİN,E.ÇELİK,Z.A.ALICIKUŞ,”Production,characterization, and luminespent properties of Eu3+ doped yttrium niobate-tantalate films”,Journal of Advanced Ceramics,vol.6,pp.33-42,March 2017
- (*)M.F. EBEOĞLUGİL,R.YİĞİT,K.KÖSEOĞLU,E.AVCI,E.ÇELİK,”Fabrication of new high temperature Gd2O3-ZrO2 insulation coatings on Ag tapes by sol-gel technique for magnet technology”,J Aust Ceram Soc,vol 53,pp.361-372,March 2017
- (*)İ.ARITMAN,S.YILDIRIM,A.KİSA,L.F.GULERYUZ,M.YURDDAŞKAL,T.DİKİCİ,E.ÇELİK,”Synthesis and Characterization of Gd2O2SO4:Pr3+ Scintillation Material Produced by sol-gel process for digital imaging system”,Acta Physica Polonica A,vol.131,pp.106-108,January 2017
- (*)S.DEMİRCİ,T.DİKİCİ,M.YURDDAŞKAL,S.GÜLTEKİN,M.TOPARLI,E.ÇELİK,”Synthesis and characterization of Ag doped TiO2 heterojunction films and tehir photocatalytic performances”,Applied Surface Science,vol.390,pp.591-601,December 2016
- (*)E.ERTUŞ,S.YILDIRIM,E.ÇELİK,”Effect of La3+ and Ti4+ Ions on the Magnetic Properties of Barium Hexaferrite Powders Synthesized Using sol-gel Method”,Journal of Magnetics,vol.21,pp.496-502, December 2016
- (*)M.YURDDAŞKAL,T.DİKİCİ,E.ÇELİK,”Effect of annealing temperature on the surface properties and photocatalytic efficiencies of Cu2O/CuO structures obtained by thermal oxidation of Cu layer on titanium substrates”,Ceramics International,vol.42,pp.17749-17753,November 2016
- (*)O.SANCAKOĞLU,E.ÇELİK,”Super har Wc-Cr composite coating:An approach to potential wear applications”,Materials Testing,Vol.58,pp.864-869,October 2016
- (*)İ.AYDIN,K.ERTEKİN,S.DEMİRCİ,S.GÜLTEKİN,E.ÇELİK,”Sol-gel synthesized Sr4Al14O25:Eu2/Dy3 blueegreen phophorous as oxygen sensing materials”,Optical Materials,vol.62,pp.285-296,October 2016
- (*)O.ERTUĞRUL,R.DALMIŞ,S.AKPINAR,İ.M.KUŞOĞLU,E.ÇELİK,”Influence of zircon particles size on conventional and microwave assisted reaction sintering of in-situ mullite-zirconia composites”,Ceramics International,vol.42.pp.11104-11117,July 2016
- (*)S.YILDIRIM,M.YURDDAŞKAL,T.DİKİCİ,İ.ARITMAN,K.ERTEKİN,E.ÇELİK,”Structural and luminescence properties of undoped,Nd3+ and Er3+ doped TiO2 nanoparticles synthesized by flame spray pyrolysis method”,Ceramics International,vol.42,pp.10579-10586,July 2016
- (*)İ.YARICI,M.EROL,E.ÇELİK,Y.ÖZTÜRK,”Effect of pH and annealing temperature on the structural and magnetic properties of cerium-substituted yttrium iron garnet powders produced by the sol-gel method”,Materials Science-Poland,vol.34,pp.362-367,June 2016
- (*)M.YURDDAŞKAL,T.DİKİCİ,S.YILDIRIM,M.TOPARLI,E.ÇELİK”,Fabrication and characterization of nanostructured anatase TiO2 films prepared by electrochemical anodization and their photocatalytic properties”,Journal of Alloys Compounds,vol.651,pp.59-71,December 2015
- (*)O.SANCAKOĞLU,U.GÜLER,E.ÇELİK,T.AKSOY,”Fabrication of Cr-Cr23C6/Cr2N composite coatings: change in the microstructure by heatreatment and effect on the corrosion properties”,International Journal of Applid Ceramic Technology,vol.12,pp.830-836,August 2015
- (*)Y.A.HÜSNÜGÜL,E.ÇELİK,”Multifunctional polymer composites;antibacterial,flame retardant,radar absorbing self-healing”,Journal of Composites Materials,vol.49,pp.2469-2482, August 2015
- (*)M.KAPLAN,M.F. EBEOĞLUGİL,R.YİĞİT,K.KÖSEOĞLU,E.ÇELİK,E.AVCI,”High temperature Tb2O3-ZrO2 insulation coatings on Ag tapes by sol-gel technique for magnet technology”,Jokull Journal,vol.65,July 2015
- (*)S.KAÇMAZ,K.ERTEKİN,Ö.ÖTER,C.GÜNDOĞDU HIZLIATEŞ,Y.ERGÜN,E.ÇELİK,”Manipulation of pH induced sensitivity of a fluorescent probe in presence of silver nanoparticles”,Journal of Luminescence,vol.168,pp.228-235,June 2015
- (*)A.PALA,R.R.POLITI,G.KURŞUN,M.EROL,F.BAKAL,G.ÖNER,E.ÇELİK,”Photocatalytic degradation of cyanide in wastewater using new generated nano-thin film photocatalyst”,Surface and Coating Technology,vol.271,pp.207-216,June 2015
- (*)A.PALA,R.R.POLITI,G.ÖNER,G.KURŞUN,F.BAKAL,Ö.CANPOLAT,E.ÇELİK,”Nanocoating thin film applications on water treatment”,Materials Today:Proceedings,vol.2,pp.271-280,June 2015
- Z.AY,K.ERTEKİN,E.ÇELİK,C.VARLIKLI,Ç.ŞAHİN,”Oxygen sensing properties,of embedded amphiphilic ruthenium(II) derivatives in presence of silver nanoparticles”,Sensor Letters,vol.13,pp.1-11,June 2015
- (*)S.DEMİRCİ,B.ÖZTÜRK,S.YILDIRIM,F.BAKAL,M.EROL,O.SANCAKOĞLU,R.YİĞİT,E.ÇELİK,T.BATAR,”Synthesis and Comparison of the photocatalytic activities of flame spray pyrolsis and sol-gel derived magnesium oxide nano-scale particles”,Materials Science in Semiconductor Processing,vol.34,pp.154-161,June 2015
- N.ONAR,G.METE,A.AKŞİT,B.KUTLU,E.ÇELİK,”Water-and-Oil-Repellency Properties of Cotton Fabric Treated with Silane,Zr,Ti based Nanosols”,International Journal of Textile Science,vol.4,pp.84-96,May 2015
- (*)F.AK AZEM,I.BİRLİK,V.BRAIC,M.TOPARLI,E.ÇELİK,A.PARAU,A.KISS,I.TITERONCU,A.VLADESCU,”Effect of SiC interlayer between Ti6Al4V alloy and hydroxyapatite films”,Proceeding of the Institute of Mechanical Engineers,Part H:Journal of Engineering in Medicine,vol.229,pp.307-318,April 2015
- H.YILMAZ ATAY,İ.YAŞA,E.ÇELİK,”Antibacterial polymer composite coating with syntesized silver nanoparticles”,Synthesis and Reactivity in Inorganic,Metal-Organic and Nano-Metal Chemistry,vol.45,March 2015
- (*)M.F. EBEOĞLUGİL,E.ÇELİK,”The processing and characterization of Pb(Mg1/3Nb2/3)O3 (PMN) powders for coating capacitor”,Materials Science in Semiconductor Processing,vol.31,pp.325-33,March 2015
- (*)S.DEMİRCİ,S.GÜLTEKİN,S.A. AKALIN,Ö.ÖTER,K.ERTEKİN,E.ÇELİK,”Synthesis and spectral characterization of Sr4Al14O25:Eu2/Dy3 bluegreen phosphorous powerders by sol-gel method”,Materials Science in Semiconductor Processing,vol.31,pp.611-617,March 2015
- (*)S.DEMİRCİ,B.OZTURK,S.YILDIRIM,F.BAKAL,M.EROL,O.SANCAKOĞLU,R.YİĞİT,E.ÇELİK,T.BATAR,”Synthesis and comparison of the photocatalytic activities of flame spray pyrolysis and sol-gel derived magnesium oxide nano-scale particles”,Materials Science in Semiconductor Processing,vol.34,pp.154-161,March 2015
- (*)T.DİKİCİ,S.YILDIRIM,M.YURDDAŞKAL,M.EROL,R.YİĞİT,M.TOPARLI,E.ÇELİK,”A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization”,Sutface and coatings Technology,vol.263,pp.1-7,February 2015
- (*)S.KAÇMAZ,K.ERTEKİN,D.MERCAN,Ö.ÖTER,E.ÇETİNKAYA,E.ÇELİK,”An ultra sensitive fluorescent nanosensor for detection of ionic copper”,Spectrochimica Acta Part A:Molecular and Biomolecular Spectoscopy,vol135,pp.551-559,January 2015
- (*)R.YİĞİT,I.BİRLİK,N.F. AK AZEM,O.BARDAKÇIOĞLU,M.N. DURAKBASA,E.ÇELİK,”Investigation of the minimum quantity lubrication grinding using nanofluids”,Technical Univ Cluj-Napoca,pp.427-430,December 2014
- (*)A.PALA,R.POLITI,G.KURŞUN,M.EROL,F.BAKAL,G.ÖNER,E.ÇELİK,”Photocatalytic degradation of cyanide in wastewater using new generated nano-thin film photocatalyst”,Surface and Coatings Technology,vol.271,pp.207-216, December 2014
- (*)A.VLADESCU,I.BİRLİK,V.BRAIC,M.TOPARLI,E.ÇELİK,F. AK AZEM,”Enhancement of the mechanical properties of hdyroxyapatite by SiC addition”,Journal of the Mechanical Behavior of Biomedical Materials,vol.40,pp.362-368,December 2014
- (*)M.EROL,T.DİKİCİ,M.TOPARLI,E.ÇELİK,”The effect of anodization parameters on the formation of nanoporous TiO2 layers and their photocatalytic activities”,Journal of Alloys and Compounds,vol.604,pp.66-72, August 2014
- N.LKHAGVAJAV,M.KOIZHAIGANOVA,I.YASA,E.ÇELİK,Ö.SARI,”Characterization and antimicrobial performance of nano silver coating on leather materials”,Brazilian Journal of Microbiology,vol.46,pp.41-48,June 2014
- (*)P.KÖSE YAMAN,E.SUBAŞI,H.TEMEL,Ö.ÖTER,E.ÇELİK,”Synthesis,characterization,catalytic applications and optical sensing properties of palladium complexes containing tetradentate schiff bases”,Asian Journal Chemistry,vol.26,pp.2581-3587,June 2014
- (*)O.ÖZTÜRK,Ö.ÖTER,S.YILDIRIM,E.SUBAŞI,K.ERTEKİN,E.ÇELİK,H.TEMEL,”Tuning oxygen sensitivity of ruthenium complex exploiting silver nanoparticles”,Journal of Luminescence,vol.155,pp.191-197,June 2014
- (*)T.DİKİCİ,S.YILDIRIM,M.YURDDAŞKAL,M.EROL,R.YİĞİT,M.TOPARLI,E.ÇELİK,”A comparative study on the photocatalytic activities of microporous and nanoporous TiO2 layers prepared by electrochemical anodization”,Surface and Coatings,vol.263,pp.1-7,May 2014
- (*)A.SAVRAN,M.ALICI,S.YILDIRIM,R.YİĞİT,E.ÇELİK,”Application of a neural network for estimating the crack formation and propagation in sol-gel CeO2 coatings during processing at temperature”,Materials and Technology,vol.48,pp.453-457,April 2014
- H.YILMAZ ATAY,E.ÇELİL,”Size dependence of flame retardant polymeric composite coatings/paints reinforced epoxy dye composite coatings”,An Indian Journal MASAJ,vol. 1,pp.85-96,March 2014
- (*)Y.A.HÜSNÜGÜL,E.ÇELİK,”Barium hexaferrite reinforced polymeric dye composite coatings for radar absorbing applications”,Polymer Composites,vol.35,pp.602-610,March 2014
- (*)M.EROL,T.DİKİCİ,M.TOPARLI,E.ÇELİK,”The effects of anodization parameters on the formation of nanoporous TiO2 layers and their photocatalytic activities”,Journal of Alloys and Compounds,vol.604,pp.66-72,March 2014
- (*)S.KAÇMAZ,K.ERTEKİN,Ö.ÖTER,D.MERCAN,E.ÇETİNKAYA,E.ÇELİK,”A novel fluorescent nano-scale sensor for detection of trace amounts of Ca(II) ions”,Journal of Luminescence,vol.147,pp.265-272,March 2014
- (*)S.AYDOĞDU,K.ERTEKİN,M.GÖÇMENTÜRK,Y.ERGUN,E.ÇELİK,”Emission based sensing of subnanomolar dissolved carbon dioxide exploiting electrospun nanofibers”,International Journal of Polymeric Materials and Polymeric Biomaterials,vol.63,pp.197-206,January 2014
- (*)T.DİKİCİ,M.EROL,M.TOPARLI,E.ÇELİK,”Characterization and photocatalytic properties of nanoporous titanium dioxide layer fabricated on pure titanium substrates by the anodic oxidation process”,Ceramics International,vol. 40,pp.1587-1591,January 2014
- (*)M.ÖZDEMİR,E.ÇELİK,Ü.CÖCEN,”Effect of viscosity on the production of aluina borate nanofibers via electrospinning”,Materiali in Technolojije/Materials and Technology,vol.47,pp.83-86,December 2013
- (*)O.ÇULHA,İ.TÜRKMEN,M.TOPARLI,E.ÇELİK,”Finite-element model of the indentation for YBCO-based supreconductor thin films”,Materiali in Technolojije/Materials and Technology,vol. 12,pp.723-733,December 2013
- (*)M.EROL,O.SANCAKOĞLU,M.YURDDAŞKAL,S.YILDIRIM,E.ÇELİK,”A Comparison on Physical, Structural, and Photocatalytical Properties of TiO2 Nanopowders Produced Using Sol‐Gel and Flame Spray Pyrolysis”,International Journal of Applied Ceramic Technology,vol. 10,pp. 931-938,December 2013
- Y.A.HÜSNÜGÜL,E.ÇELİK,”Radar absorbing composites reinforced with barium hexaferrite powder”,Society of Plastics Engineers Plastics Research Online,October 2013
- (*)O.SANCAKOĞLU,M.EROL,B.AGADAY,E.ÇELİK,”Electro-codeposited Cr-SiC composite coatings: effect of pulse curret frequency on morphology and hardness”,Materials and Technology,vol. 47,pp. 601,August 2013
- (*)M.ZEYREK ONGUN,K.ERTEKİN,Ö.ÖTER,G.SABANCI,E.ÇELİK,”Enhanced stability of ruthenium complex in ionic liquid doped electrospun fibers”,Sensors and Actuators B: Chemical,vol.183,pp. 11-19,July 2013
- (*)M.ZEYREK ONGUN,K.ERTEKİN,C.GÜNDOĞDU HIZLIATEŞ,Ö.ÖTER,Y.ERGUN,E.ÇELİK,”Determination of Hg(II) at sub-nanomolar levels: A comparative study with nanofibrous materials and continuous thin films”,Sensors and Actuators B: Chemical,Vol. 181,pp. 244-250, May 2013
- (*)S.KÜÇÜKDERMENCİ,D.KUTLUAY,E.ÇELİK,Ö.MERMER,İ.AVGIN,”Concentration and path-length dependence on the faraday rotation of magnetic fluids based on highly water-soluble FE3O4/PP nanoparticles synthesized by a high temparature hydrolysis method”,Materiali in Tehnologije/Materials and Technology, vol. 47, pp.323-327, May 2013
- (*) O.CULHA, I. BIRLIK, M.TOPARLI, E. CELIK, S.ENGEL and B. HOLZAPFEL, “Characterization and Determination of Mechanical Properties YBCO Superconducting Thin Films with Manganese Using the TFA-MOD Method”, Materiali in Tehnologije/Materials and Technology, vol. 47, pp.153-160, April 2013
- (*) M. EROL, O. SANCAKOGLU, M. YURDDAŞKAL, S. YILDIRIM and E. CELIK, “A Comparison on Physical, Structural and Photocatalytical Properties of TiO2 Nanopowders Produced Using Sol-gel and Flame Spray Pyrolysis”, International Journal of Applied Ceramic Technology, pp. 1-8, April 2013
- (*) Y. ÖZTURK, M. EROL, E. ÇELİK, Ö. MERMER, G. KAHRAMAN and I. AVGIN, “Structural and Magnetic Properties of Cerium-doped Yttrium Iron Garnet Thin Films Prepared on Different Substrates Using Sol-gel Process”, Materiali in Tehnologije/Materials and Technology, vol. 47, pp. 59-63, March 2013
- (*) M. EROL and E. CELIK, “Graphite Flake-Carbon Black Reinforced Polystyrene Matrix Composite Films Deposited on Glass Fiber Woven Fabrics as Plane Heaters”, Materiali in Tehnologije/Materials and Technology, vol. 47, pp. 25-28, March 2013
- (*) S. KAÇMAZ, K. ERTEKİN, M.GÖÇMENTÜRK, A. SÜSLÜ, Y. ERGUN and E. ÇELİK, “Selective Sensing of Fe3+ at Pico-molar Level with Ethyl Cellulose Based Electrospun Nanofibers”, Reactive and Functional Polymers, vol. 73, pp.674-682, March 2013
- (*) H. YILMAZ ATAY, L. ERAL DOGAN and E. CELIK, “Investigation of Self-healing Property of Chitosan Reinforced Epoxy Dye Composite Coatings”, Journal of Materials, vol. 213, pp. 8-15, January 2013
- (*) A. GOKTAS, I.H. MUTLU, Y. YAMADA and E. CELIK, “Influence of pH on the Structural, Optical and Magnetic Properties of Zn1-xMnxO4 Thin Films Grown by Sol-gel Method”, J. Alloys and Compounds, vol. 553, pp.259-266, January 2013
- (*) H. YILMAZ ATAY and E. CELIK, “Electrical Behaviours of Flame Retardant Huntite and Hydromagnesite Reinforced Polymer Composites”, ISRN Polymer Science, pp. 1-9, December 2012
- E. CELIK, F. OZTOPRAK, M.F. EBEOGLUGIL, I. BIRLIK, R. YIGIT, M. TANOGLU and M.H. ASLAN, “Synthesis, Characterization and Optical Properties of ZnO-CuO-Al2O3 Semiconducting Films on Glass Substrates by Sol-Gel Technique”, Journal of Material Sciences, vol. 2, pp. 9-36, December 2012
- (*) I.Yaşa, N.Lkhagvajav, M.KoIzhaIganova, E.CelIk and O. SARI, “Assessment of Antimicrobial Activity of Nanosized Ag-TiO2 Colloids”, World Journal of Microbiology and Biotechnology, 2012
- (*) A. GURBUZ, N. ONAR, İ. OZDEMİR, A.C. KARAOGLANLI and E. CELİK, “Structural, Thermal and Magnetic Properties of Barium-Ferrite Powders Substituted with Mn, Cu or Co and X (X=Sr and Ni) Prepared by the Sol-Gel Method”, Materiali in Tehnologije/Materials and Technology, vol. 46(3), pp.305-310, June 2012
- (*) S. KAÇMAZ, K. ERTEKİN, A. SÜSLÜ, Y. ERGUN, E. ÇELİK and U. CÖCEN, “Sub-nanomolar Sensing of Ionic Mercury with Polymeric Electrospun Nanofibers”, Materials Chemistry and Physics, vol. 133, pp. 457-552, February 2012
- (*) M.KoIzhaIganova, N.Lkhagvajav, I.Yaşa and E.CelIk, “New Gelatin-Hydroxyapatite Nanocomposite Films Containing Nano Silver: Synthesis, and, Mechanical and Antimicrobial Properties”, Journal of Bionanoscience, 2011
- (*) Y. ÖZTURK, M. EROL, E. ÇİNKILIÇ, E. ÇELİK and I. AVGIN, “Production of Cerium and Bismuth Doped Yttrium Iron Garnet Thin Films with Unusual Magnetic Properties Using Sol-gel Method”, International Journal of Material Science and Electronic Research, Vol. 2, pp. 25-31, December 2011
- (*) S. AYDOĞDU, K. ERTEKİN, A. SÜSLÜ, M. ÖZDEMİR, E. ÇELİK and U. CÖCEN, “Optical CO2 Sensing with Ionic Liquid Doped Electrospun Nanofibers”, Journal of Fluorescence, vol. 21, pp. 607-613, December 2011
- (*) O. SANCAKOGLU, O.CULHA, B. AGADAY, M. TOPRARLI and E. CELİK, “Co-deposited Zn-Submicron Sized Al2O3 Composite Coatings: Production, Characterization and Micromechanical Properties”, Materials and Design, vol. 32, pp. 4054-4061, April 2011
- (*) S. KAÇMAZ, K. ERTEKİN, A. SÜSLÜ, M. ÖZDEMİR, Y. ERGUN, E. CELIK and U. CÖCEN, “Emission Based Sub-nanomolar Silver Sensing with Electrospun Nanofibers”, Sensor and Actuators B: Chemical, vol. 153, pp.205-213, March 2011
- (*) N. LKHAGVAJAV, I.YASA, E. CELIK, M. KOIZHAIGANOVA and O. SARI, ”Antimicrobial Activity of Colloidal Silver Nanoparticles Prepared by Sol-gel Method”, Digest Journal of Nanomaterials and Biostructures, vol. 6, pp. 149-154, February 2011
- (*) A. OKUR, R. YİĞİT, E. CELIK, and O. SAYMAN, “Thermal Stress Analysis in ZrO2 Insulation Coatings on Cr-Ni Substrates During Cooling Process”, Mathematical and Comptational Applications, vol. 16, pp. 598 – 604, January 2011
- (*) H. YILMAZ ATAY and E. CELIK, “Use of Turkish Hydromagnesite & Huntite Minerals in Plastic Materials as a Flame Retardant”, Polymer Composite, Vol. 31, pp. 1692-1700, June 2010
- (*) I. BIRLIK, M ERBE, T. FREUDENBERG, E. CELIK, L. SCHULTZ and B. HOLZAPFEL, “Flux Pinning Improvement of YBCO Superconducting Films with BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, Journal of Physics: Conference Series, vol. 234, pp. 012004, August 2010
- (*) A. PASINLI, M. YÜKSEL, E. CELIK. S. SENER, and A.C.TAS, “A New Approach in Biomimetic Synthesis of Calcium phosphate Coatings using Lactic acid-Na Lactate Buffered Body Fluid Solution”, Acta Biomaterialia, vol. 6, pp. 2282-2288, May 2010
Not:(*) Makalelerin SCI’de yayınlandığını veya yayınlanacağını göstermektedir.